See every pressure reading, right now.
Your farm water system, monitored around the clock - with the data you need to act before a problem becomes a crisis.
📊 Dashboard overview
See all your water pressure sensors at a glance. The overview shows current readings for every sensor on your account so you can check the whole farm at once - from your phone or desktop.
Main dashboard showing all connected sensors and current pressure
📅 See your pressure history
Spot trends before they become problems. Up to 13 months of pressure data lets you see if your system is gradually losing pressure, if pump cycles are getting longer, or if something changed after a repair. Useful not just for emergencies - but for understanding how your water system actually behaves.
Weekly view shown - look back up to 13 months to see patterns and catch slow changes early
🔔 Low pressure SMS/TXT and app alerts
Set your own pressure threshold and get an SMS/TXT and an app notification when readings come in below it for a sustained period. You decide what counts as a problem. Works day and night - and even without the app installed, a text reaches your phone when the sensor next reports in and something's wrong.
Configure alerts for your specific system - threshold, duration, and recipients
⏱️ Minute-by-minute pump cycle data
Pressure readings are taken every minute and uploaded every 5 minutes to 3 hours (depending on battery level). This lets you see exactly what happened each minute - including the rise and fall of individual pump cycles. Invaluable when diagnosing an intermittent issue or checking that a repair actually fixed the problem.
Detailed minute-by-minute pump cycle view - see exactly how your pump is behaving
📈 Daily pressure ranges
A 21-day chart shows the highest and lowest pressure for each day, so a slow decline or an unusual day stands out straight away. Tap a day to see it minute by minute, or switch between the last 3, 6, 12 or 24 hours.
🩺 Sensor health alerts
Get an app notification if a sensor stops reporting, the pressure sensor is disconnected or faulty, or the battery runs low. Active alerts show on the sensor page with when they started, and recent events are listed so you can see what happened and when it was resolved.
👥 Share with family and staff
Send a link that gives someone read-only access to a sensor - a partner, farm manager, or neighbour keeping an eye on things while you're away. See who has access and revoke it at any time.
🔄 Built to keep running
If the signal drops out, readings are stored on the sensor and sent when the connection returns - so your history has no gaps. Firmware updates arrive over the air automatically, and if hardware ever needs swapping, your sensor keeps its name, history and alert settings.
Ready to get started?
$349.95, then $13.80 a month (incl. GST). Installation takes under 10 minutes and you can be monitoring the same day.